10*38引線式防水保險絲座H3-1038A
1 外殼 holderPVC,阻燃度 94 V0,環保,散熱,(PVC, flame retardant 94 V0, environmental protection,
heat dissipation.)
2 金屬端子 Terminal H62 黃銅鍍鎳(H62 brass nickel plating)。
3 線纜 UL標準線材8~14AWG 兩端各外露(可根據客戶要求適配)。UL standard wire 8~14AWG is exposed at both ends (can be adapted according to customer requirements)
4、軸向拉力強度 / Lead Pull Strength 200 牛頓 10±1 秒 /200N for 10±1 Seconds
5、 使用溫度范圍 Operating Temperature`
-40 ℃ ~+130 ℃ 。
冷熱沖擊實驗 Cold and Heat Shock Test
-40 ℃溫度持續 30Min --- 25 ℃ 持續 5min---- 130 ℃持續 30min -----25 ℃持續 5min 為 1 個循環
-40 ℃ for 30Min --- 25 ℃ for 5min---- 130 ℃ for 30min -----25 ℃ for 5min 1 cyccles
100 各循環后,防水特性測試達到 IP67 防水標準要求。
After 100 cycles, the waterproofing characteristic test meets the IP67 waterproofing standard requirements.
6、 防水座子反復拉拔測試 1000 次,始終保持密封強度,防水等級達到 IP67 防水要求
The waterproof seat is repeatedly pulled out and tested 1000 times, and the sealing strength is always maintained. The waterproof grade meets the waterproof requirement of IP67.
7、拔開保險絲座子,將 10*38 的保險絲裝入保險絲盒子,上下蓋壓緊,再裝以卡扣,將裝有保險絲的保險絲盒兩端引線串接在需要保護的電路中。
Unplug the fuse holder, put the 10*38 fuse into the fuse box, press the upper and lower cover tightly, and then install the buckle. Connect the fuse box with the fuse leads at both ends in series in the circuit that needs protection.